27-Mar-07: The Kam+ was discontinued in 1998, and the Kam-98 was discontinued in March 2005 with the KAM-XL is the recommended replacement.  See the Kantronics links below for specifications, information on these TNCs.

http://www.kantronics.com/products/kamxl.html

http://www.kantronics.com/legacy.html

The following is a typical listing of the KAM[x] as could be seen by Outpost.

cmd:c ve3gqw-1

cmd:*** CONNECTED to VE3GQW-1 [02/10/07 17:52:26]

[KAME-7.1-HM$]

99602 BYTES AVAILABLE

THERE ARE 3 MESSAGES NUMBERED 75-77

YOU HAVE 1 MESSAGE(S) WAITING

ENTER COMMAND: B,J,K,L,R,S, or Help >

lm

MSG#  ST SIZE TO     FROM   DATE              SUBJECT

77    B  87   VE3GQW VE3GQW 02/07/07 13:33:02 Bulletin test

76   PY  127  VE3GQW VE3GQW 02/07/07 13:30:49 Second test

75   PH  103  VE3GQW VE3GQW 02/07/07 13:29:46 Test for Outpost

ENTER COMMAND: B,J,K,L,R,S, or Help >

lb

MSG#  ST SIZE TO     FROM   DATE              SUBJECT

77    B  87   VE3GQW VE3GQW 02/07/07 13:33:02 Bulletin test

ENTER COMMAND: B,J,K,L,R,S, or Help >

r 76

MSG#76 02/07/07 13:30:49 FROM VE3GQW TO VE3GQW

SUBJECT: Second test message for Outpost

PATH: VE3GQW

Yet another test message to see what the KAM ver 7 displays.  Test for LM and LB commands.

Bob

ENTER COMMAND: B,J,K,L,R,S, or Help >

IMPLEMENTATION
SID = [KAME-7.1-HM$]
SID = [KAM-XL-1.0-HM$]
SID = [KAMP-8.0-HM$]
SID = [KAM98-8.3-HM$]
The KAM PBBSs behave identically to the KPC3 series PBBS.  Outpost looks for the "[KAM" phrase of the SID as the means for identifying these TNCs.  Once identified, Outpost processes them the same way as the KPC3 PBBSs.  

The KAM PBBS Prompts are fixed, and Outpost defaults to "Help >".   The message format is the same as the KPC3 series.

CONFIRMATION
Assumed operational as of the v2.2 release.  No reported problems with these KAMs.  See the KAM-4 listing for additional details. 

CONSIDERATIONS
none
 

SPECIAL CONFIGURATIONS, SETTINGS
None.