Outpost TNC Message Manager, Ip2.0.2, 20-August-2005
	    Copyright (c) 2003 - 2005 Jim Oberhofer KN6PE


1. Ip2.0.2 Overview
2. Who whould install Ip2.0.2
3. Update Notes


1.  Ip2.0.2 OVERVIEW
----------------------------------
The Ip2.0.2 release is an UPDATE to the Interactive Packet (IP) Programs 
for the general Outpost v2.0 release.  This release corrects the following
reported v2.0 problems:

#483.  On Ipagwpe.exe (Interactive Packet for AGWPE), sets the default
to Show Raw packets to OFF.  It originally defaulted to ON.  This is
only a problem the first time you run the program.

#484.  On Ipagwpe.exe, Ipserial.exe, and Iptelnet.exe (all Interactive
Packet programs), fixes the problem where the programs were not remembering
their last position and aspect ratio.


2. WHO SHOULD INSTALL IP2.0.2
----------------------------------
Ip2.0.2 corrects problems with how the program behaves from one Interactive
Packet session to the next.  

If you are not a heavy user of IP for AGWPE, Telnet, or Serial, you may 
not need to install it.  If you do use this program extensively, this will
improve the overall user experience.


3. UPDATE NOTES
----------------------------------
Version Ip2.0.2 is FULLY compatible with the v2.0 release.  To use this 
update, Version Outpost v2.0 must have been previously installed.  
Installing Ip2.0.2 on top of any pre-V2.0 release should not cause a 
problem with general use, but will not work correctly if attempting to 
create an Outpost message from the IP program.

The Ip2.0.2 distrubition is not a full installation package.  Instead,
it only contains the executables and is intended to replace specific v2.0 
executables that were previously installed.

To install the Ip2.0.2 Update, proceed as follows:

1.  Confirm that Outpost v2.0 was previously installed.  If not, install
v2.0 first.

2.  Go to where Outpost v2.0 was installed... Probably in the following
directory... c:\program files\Outpost

3.  Rename the following files:
	Ipagwpe.exe to Ipagwpe200.exe
	Iptelnet.exe to Iptelnet200.exe
	Ipserial.exe to Ipserial200.exe

4.  Unzip the Ip202 Upgrade file.  You will find Ipagwpe.exe, Ipserial.exe, 
Iptelnet.exe, and README202.txt (this file).

5.  Copy the contents to the Outpost directory.

6.  Run the program as usual.



Best Regards,

Jim O  KN6PE
Emergency Coordinator
Cupertino ARES/RACES
Cupertino, CA


---------------
Readme.txt; v2.0.2, 20-Aug-05
Readme.txt; v2.0.0, 18-Jun-05
Readme.txt; v1.3.4, 03-Jan-05
Readme.txt; v1.3.3, 29-Dec-04
Readme.txt; v1.3.1, 20-Dec-04
Readme.txt; v1.3.0, 17-Dec-04
Readme.txt; v1.2.7, 10-Oct-04
Readme.txt; v1.2.1, 04-Sep-04
Readme.txt; v1.2.0, 22-May-04
Readme.txt; v1.1.4, 20-Apr-04
Readme.txt; v1.1.2,  3-Apr-04
Readme.txt; v1.1.1, 14-Mar-04
Readme.txt; v1.1.0, 27-Feb-04
Readme.txt; v1.0.3, 09-Nov-03
Readme.txt; v1.0.2, 23-Oct-03
Readme.txt; v1.0.1, 19-Oct-03
Readme.txt; v096.2, 23-Jul-03
Readme.txt; v096.1, 01-Jul-03
Readme.txt; v095.2, 28-May-03